Property	Test Method 检验方法	Epidian 6
Appearance 外观颜色		Clear, Light Yellow Liquid
Epoxid Valueval / 100 g环氧值	Internal Method	0.51-0.54
Epoxid equivalent环氧当量	Internal Method	185-196
viscosity at 25 oC mpas粘度值	DIN 53015	15000 max
Total chlorine content %wt 氯的含量（决定绝缘性能）	ASTMD 1726/87	0.2 max
Co lour, Gardner scale 格式颜色检测方法	ISO 4630	=<1 x
Softening point oC软化点	ASTM D36-38	---
Non-volatiles content %wt 挥发份(不挥发性)	DINENISO 3251	99 min
Density at 20 oC kg/m3	DIN51757	---
Flash Point oC闪点时间		300 min
Point oC闪点温度（与闪点时间同时使用）		200
Mol.Weight(mn) 分子量（表示液体或固体)		371.3 液体

三、产品包装：

Epidian6规格：220Kg/桶

Description

ultra clear epoxy resin/clear epoxy casting resin/epoxy resin for wood furniture

We offer 3-1 resin customization services;

Stable Crystal Clear Table Top System is a high performance two component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 3 to 1 by volume mix ratio, maintains its integrity over sharp corners, and it has excellent air release qualities and a relatively fast set time for an epoxy coating.

Properties before Hardening

Model A B

Color Transparent Transparent

Specific gravity 1.15 0.97

Viscosity (25℃) 4000-8000CPS 50CPS MaxCPS

Mixing ratio A: B = 100:33(weight ratio)

Hardening conditions 25℃×8H-10H or 55℃×1.5H(2g)

Usable time 25℃×40min(100g)

Operation

1. The work environment is filled glue container please keep clean, ratio of A and B component in accordance with the weight ratio, accurate weighing, along the container wall clockwise fully mix and let stand for 3 to 5 minutes after use.

2. According to the operational time and dosage of mixing rubber, avoid the waste. When the temperature below 15 ℃, please A glue to glue again after warm up to 30 ℃, easy operation, low temperature when A glue will thicken);After use, the lid shall be sealed to prevent the product from being scrapped.

3. When the relative humidity is more than 85%, the curing surface easy to absorb moisture, air to form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, recommend the use of heat curing

Caution

1,The operating environment should be ventilate and should keep away from fire. Closely sealed after use.

2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.

3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.

4, Keep away from children.

5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life

1, Store at the tempestuous of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.

2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C. .

上一个 : 环氧树脂E-51适用行业：涂料（建筑涂料，防腐涂料）、油墨，生产抛光轮（尤其是尼龙抛光轮-也叫不织布抛光轮）、地坪（自流坪）、灌封胶、绝缘漆（电气工业），高分子化工等行业。下一个 : T-31环氧树脂固化剂该树脂是一种改性胺类环氧树脂固化剂，与环氧树脂，增韧剂等配合固化后，具有毒性低，室温快速固化，粘接强度高、硬度高之特点